| |
COPPER PIPES AND FITTINGS
SEAMLESS COPPER TUBES / FITTINGS : For Air Conditioning, Refrigeration and Plumbing Needs
General Properties :
- Specifications : ASTMB280, AS1571-1985, ASME B16.22, ASTM B88
- Typical Chemical Composition:
- TLM carries an extensive range of copper pipes to suit every customer’s requirement.
- The pipes and fittings are made of top quality material and are hydrostatically tested to ensure optimum performance under maximum test pressure.
Profiles available:
- Type K / Type L / Type M / Table X / Table Y Pipes
- Hard Drawn Length (5.8mtr / 6mtr)
- Annealed Coil (Pancake Coil / 15mtr)
- Union Fittings (C x C / C x M / C x F)
- Coupling
- Reducing Coupling
- Tee ( C x C x C / C x C x M / C x C x F)
- Elbow (45 Deg / 90 Deg / Short / Long Radius)
- Adapters (C x M / C x F)
- End Cap
- U-Bend
- Companion Flanges
Click here for more information on ratings for various forming, surface finishing and joining processes.
| Fabrication Properties |
| Cold working capacity | Very good |
| Riveting and peening | Very good |
| Thread rolling | Very good |
| Bending | Very good |
| Cold heading | Very good |
| Hot working capacity | Very good |
| Hot forging rating | Good |
| Hot working temperature | 750°C-875°C |
| Annealing temperature | 375°C-650°C |
| Stress relieving temperature | 175°C |
| Joining properties |
| Soft soldering | Very good |
| Silver soldering | Good |
| Brazing | Good |
| Oxy-acetylene welding | Not recommended |
| Carbon arc welding | Fair |
| Gas shielded arc welding | Fair |
| Coated metal arc welding | Not recommended |
| Resistance welding-spot | Not recommended |
| Resistance welding-seam | Not recommended |
| Resistance welding-butt | Good |
| Corrosion resistance |
| Industrial atmosphere | Very good |
| Urban atmosphere | Very good |
| Marine atmosphere | Very good |
| Sea water | Good |
| Drinking water | Very good |
Email us for more information on this product.
Disclaimer: All details are given in good faith and have been carefully checked. The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should NOT be used for specification purposes. Only the full mill certificate can be accepted as accurate information regarding the properties of the metal supplied by TLM.
|
Catalogue
Our Products
Aluminium
